Printer friendly
"AcronymAttic.com

What does VTT stand for?

VTT stands for Valid Transmission Time

Advertisement:

This definition appears very frequently

See other definitions of VTT

Other Resources: Acronym Finder has 29 verified definitions for VTT

Samples in periodicals archive:

to indicate to the access network 100, a specific (e.g., explicitly request) secondary pilot to allocate during a next valid transmission time...
Optimization of valid transmission time for cognitive users[J];Journal of PLA University of Science and Technology(Natural Science Edition)...
Sets the Valid Transmission Time (TVX) timer for a specific FDDI interface. The range for the TVX timer is from 2.35 milliseconds to 5.2224 milliseconds.
interface fddi 0 fddi valid-transmission-time 3000 The following example changes the transmission timer interval to 3000 microseconds on a Cisco 7000...
fddi valid-transmission-time : flowcontrol : format : frame-relay adaptive-shaping : frame-relay [ bc | be] frame-relay becn...
Valid Transmission Time/Timer; TWAIN: Technology Without An Interesting Name; TWAIN: Toolkit Without An Interesting Name; TWI: Two-wire Interface; TWINKLE...
Compaction of SATPS information for subsequent signal processing; truncated from a time 3.5 days after the first valid transmission time for the almanac data set.
P i~o is the valid transmission time for SU since it spend a duration of time ~o to sense the channel. In addition, Q(Sj)f should be also introduced to the function...
Interface Commands. This chapter describes the function and displays the syntax of each interface command; fddi valid-transmission-time microseconds.
date rate R. The throughput of the SU by using time- invariant channel only depends on the constant data rate and the valid transmission time T r.
A Monitoring the Network Interfaces. The netstat command can help you monitor the Ethernet, Fiber Distributed Data Interface; Valid Transmission Time.
If the new node cannot find a valid transmission time, that is, the network is full, it communicates the information by broadcasting a and it turns off the radio.
fddi valid-transmission-time microseconds no fddi valid-transmission-time microseconds Configures. Time to recover from a transient ring error. Default. 2,500...
Sets the valid transmission time for the FDDI device. /UPDATE...
Sets the valid transmission time for the FDDI device. Qualifiers (Token Ring Devices) /AGING_TIMER=value
is some multiple of 212 seconds occurring approximately 70 hours after the first valid transmission time for this UTC data set (reference 20.3.4.5).
the next PTT-signal detected can make a valid transmission time with the last PTT-signal detected. If AGC had been used it would
VALID TRANSMISSION TIME Applies only to FDDI lines. Resets to its default value the VALID TRANSMISSION TIME parameter in the volatile database. Removes the...
2.7. Valid transmission time (VTT) The channel-oriented structure helps the W-CHAMB protocol perform well in multi-hop mesh networks. However
a selector for selecting a TFC for data transmission on at least one transport channel available for a current valid Transmission Time Interval...
system are provided, in which it is determined whether a previous TFC used for data transmission on a previous valid Transmission Time Interval (TTI)...
fddi t-out command IC-42. fddi valid-transmission-time command IC-41. automatic receiver polarity reversal. enabling IC-45. configuration (examples)...
fddi valid-transmission-time flowcontrol format frame-relay adaptive-shaping frame-relay [ bc | be] frame-relay becn-response-enable frame-relay broadcast-queue
fairness algorithm (FA) for acquiring the fairness even in a highly interfered multi-hop network; setting valid transmission time (VTT)...
use the fddi valid-transmission-time command in interface configuration mode; (DCD) is held constant and asserted by the DCE half-duplex interface. Command...
Valid transmission time = 2620 Restricted token timeout = 1000 Ring purger enable = on NIF target = 00-00-00-00-00...
Valid transmission time. For OpenVMS, the default is determined by the operating system, and this characteristic cannot be set. 10.3.4 Counter Attributes
a selector for selecting a TFC for data transmission on at least one transport channel available for a current valid Transmission Time Interval...
To recover from a transient ring error, use the fddi valid-transmission-time interface configuration command. fddi valid-transmission-time microseconds Syntax...
collisions among nodes two hops away are avoided. If the new node cannot find a valid transmission time, that is, the network is full...
fddi valid-transmission-time. To recover from a transient ring error, use the fddi valid-transmission-time interface configuration command. fddi valid-transmission...
Interface Commands. This chapter describes the function and displays the syntax for interface commands; fddi valid-transmission-time microseconds.
fddi valid-transmission-time command feature set, IOS image FECN (forward explicit congestion notification) FEP (Front End Processor) interfaces filenames (IOS image)
is nominally the multiple of 2 12 seconds truncated from 3.5 days after the first valid transmission time for this almanac data set.
ring network when the ring is not malfunctioning. The predetermined period of time may also be less than a valid transmission time period. When...
The latter two characteristics are supported by the firmware revision V1.2 and higher. The T_REQ, Valid Transmission Time, and...