Printer friendly
"AcronymAttic.com

What does S2 stand for?

S2 stands for Scintillators S1

Advertisement:

This definition appears very rarely

See other definitions of S2

Other Resources: Acronym Finder has 9 verified definitions for S2

Samples in periodicals archive:

through the scintillators S1-$2.$3. Interaction region The fixed target interaction region is defined by the transverse beam size of (recently...
UNIVERSITY of VIRGINIA X. Zheng, May 18, 2007, Parity Collaboration Meeting Detector Arrangement: PID + Scintillators (S1,2)
Scintillators S1 and S2 are separated by a length L. (a) (b) Fig. 4. Color online a Calibration spectrum of the time-to-amplitude converter using a number of 2-ns...
5.5 p.e. in average from the MIP and with the threshold at 1.5 p.e. (0.27 of MIP). Events were selected by triggering scintillators S1 and S2...
electrons pass through a pair of segmented plastic scintillators (s1 and s2m), which form the data acquisition trigger.
Hall A with vertical drift chambers (VDC), scintillators (S1 and S2), Cerenkov detectors and the FPP (including front and rear chambers and carbon analyzer).
The scintillators S1 and S:, were used for triggering purpose, while the Cerenkov counters and the calorimeter were used for performing the particle selection.
Streamer suppression with SF 6 in RPCs operated in avalanche mode. P Camarri a, R Cardarelli a; Two scintillators, S1 and S3, have relatively large sizes...
scintillators. S1 and S2 The silicon Detector The silicon Detector close up The Second Setup. The Second Setup Now we have S1 and S2 right next to the window.
scintillators (S1 and S2) before finally stopping on the target. The beam was tuned to maximize the number of muons stopped on target.
3 Test Beam Setup Cerenkov counter (C1) upstream, everything else like scintillators (S1, SH, and SV) and wire chamber (MWPC) as close as possible to calorimeter.
scintillators S1 and S2 correspond to less than 1.8 I, where 1,is the pulse-height for a Z=l, 9=1 vertical1 y incident particle. 3) Cherenkov Detector. The...
Three planes of plastic scintillators, S1 at the top, S3 at the bottom and S2 in the middle of the carbon target form a scintillator hodoscope. Each scintillator plane
HRS Electron Arm Detectors Vertical Wire Chamber (MIT) Trigger Scintillators S1/S2 (University of Regina)
and relevant data acquisition hardware are given in the "start" scintillators S1 are currently being technical section of this report. fabricated.
A schematic drawing of the setup used in the experiment. The beam is defined by three scintillators S1,S2 and S3¯. Two magnetic dipoles, each 2 meters along the beam...
5.5.2.4 Handling Considerations Previous: Trigger Scintillators 5.5.2.2 Overview Both HRS detector systems have two planes of trigger scintillators S1 and S2...
On each HRS the detector system has two planes of trigger scintillators S1 and S2. The HA detector stack includes an optional third plane, S3.
Scintillators * o I was mainly in charge of scintillation detectors. o We used 5 scintillators: S1-1, S1-2, S2, S3-1, S3-2. o The dimensions of platic scintilators...
Further analysis of a recent cosmic-ray antiproton experiment: Authors: Buffington, A.; Schindler, S. M; For the top two scintillators S1 and S2...
and timing. The response in the third scintillator S3 was used to identify and remove these events. For the top two scintillators S1 and S2...
Tomorrow, Dana and I will take off the top module of the detector stack (the top two scintillators, S1 and S2 and the top hodoscope, HT)...
6 Test Beam Setup Cerenkov counter (C1) upstream, everything else like scintillators (S1, SH, and SV) and wire chamber (MWPC) within 0.5 m of calorimeter.
The first and second pulses were detected from single scatters in the top scintillators, S1, at energies >0.3 MeV with statistical significances of 1.6...
scintillators (S1, S2 and S3), with alternate layers placed orthogonally to each other [3]. The ToF system provides a fast signal for triggering the data acquisition...
The invention relates to a detector for the detection of electromagnetic radiation (6, 9), including scintillators (S1-S5), a photosensor device (F1-F5) and an...
Observation of Muonic X-rays from Bonel M. C. TAYLOR, L. COULSON AND G. C. PHILLIPS T. W; The scintillation telescope consisting of scintillators S1...
Need Custom S0 Scintillators S1 single rate too high Installed Next to HMS DC1 maximum available distance from S1 Scintillator Assembly Constructed by
Performance of the CALET Prototype: CERN Beam Test; trigger scintillators, S1 and S2 (10 mm × 10 mm × 2 mm), are placed in front of CHD. Signals of each SciFi
and passed through three scintillators, S1, S2 T. These scintillators served as active moderators giving a triple coincidence for incoming pions...
another pump will be installed to improve it and try to go up to the of the run Scintillators : S1 connected -> OK Beam chamber ...
Digital Ion Drift Meter (DIDM) Electrostatic Analyzer Detector (ESA); D3, and D4 (front to rear), two primary scintillators S1 and S2, and a veto scintillator S3.